Pumpkin Patch Hats

Callum's Hat

Helen's Hat

Indy's Hat

The family is gathering for a fall cookout and all the little ones have pumpkin patch hats.  Callum's hat is Rib-A-Roni:  http://www.ravelry.com/patterns/library/rib-a-roni

From some of the comments on Ravelry, there were a few that said Rib-A-Roni ran small.  I made the youth size making gauge at one rib per inch for a 3 year old and it is small.

Helen's Hat is Spiralini adapted for an 18 month old:  http://www.ravelry.com/projects/myshellyknit/spiralini-hat

This one runs large due to the slouch and my gauge.  I started with 72 stitches (4 spi) in the ribbing and then increased to 80 stitches for the body, knitting even for a total of about 5.5 inches for the length before decreasing.  The decreases are based on a 10 stitch repeat so there were no further changes.  If I had been thinking, I could have changed the swirl to a 8 stitch repeat.  That would have resulted in more sections but the swirl lines would have lined up with the ribbing like the designer's.  Helen's curling vines are crocheted.

Indy's hat is has a roll brim with 64 stitches (4 spi).  After the 2 inches of deep orange in stockinette, there is an 7x1 rib (knit 7 stitches, purl 1).  Total length before decreasing, is 5 inches.  This hat runs a bit small for this 9 month old but I have enough yarn to make another one for next year.  ;)

Hopefully, Callum's and Helen's hats will fit and we'll have a Pumpkin Patch Kids picture.

Update:  The day for the cookout was too warm for hats.  Callum politely refused to pose with Helen and Indy, so the picture below is my consolation.  Callum's hat ran small and Helen's is a bit large, most likely she will be able to wear hers next fall, too.

I Dyed for Fishy

KoolAid dyeing in a crockpot is fun and easy.  Colors that are analogous (next to each other on the color wheel) will blend better with less muddying.

Brew mix.

Dye before setting to brew (yarn soaks and heats in 2 cups white vinegar and water to cover yarn, dye is added when hot).

Squirt bottles used to insert dye in water bath.

Brewed yarn:  Water turns clear or milky in the hot bath when the yarn has absorbed all the dye.

3 oz. of dyed Lion Brand Fisherman's Wool

Fishy (free pattern from Delicious Stitches) before swim.

Fishy after swim, drying in front of a small fan.

Fishy took some hard hits but with a little reshaping, he is looking much better. 

Can this be knitting?

Yarn Bee Chrysalis in Bog Copper from Hobby Lobby

Netted ribbon yarn is not my fiber of choice but I accepted the challenge of a friend and now a scarf of layered ruffles is falling from my needles.  The work is tedious with each loop having to be spread open to hook it with the knitting needle to become the next stitch.  Don't drop a stitch, picking them up is a challenge if not impossible.  I started over, once, already.  See if I do another one!

Dilemma: Ready to Felt/Full?

16"x16" in Full o'Sheep Yarn

My Amish Jewels version of the Painted Diamonds Bag is ready to felt/full.  I-cord handles have been twisted and tied with a square knot.  Should I leave them twisted or undo them and twist them after the bag has been processed?  I am leaning towards leaving them twisted through the water bath.  Any thoughts or recommendations from experience?

Update:  Today, August 28th, was felting/fulling day.  The bag was processed with the handles twisted.  They didn't stick to the bag and they can be separated to be twisted again.  Some thought they might untwist with the vigorous agitation.  They may but they are just as likely to twist more.

Also, some recommended securing the handles with additional stitches.  I did this and I tied them before twisting.

Bag is now 13.75 inches wide by 13 inches tall.

Handles stretch when hung damp to dry.

Sticky Situation

I was blessed with a Singer Puzzle Box a week or so ago but something sticky had adhered to the surface.  From a telltale hair and previous experience with a Singer 128 from a barn with similar spots inside the base, I suspected mouse droppings.  To remove the rather large splotches in the 128 base, I soaked them with oil and scraped with a putty knife.  To cover the oily spots, I put in a nice new piece of black felt.  That process wasn't going to work for a nice looking Puzzle Box with a decent finish.

The picture above shows the worst of the droppings and two spot faintly circled in red that were test spots for cleaning products. 

Since I had used oil on the Singer 128 base, I thought maybe something oily might work but it had to have more solvent action than just oil.  Since the Treadle On members are adept at cleaning old treadles stored in unusual places, I asked for suggestions.  Murphy's Oil Soap, Paul's Elixir (a specialty home brew that seems to work similarly to Dr. Woodwell's)*, and OxiClean.  I put Paul's Elixir as a last resort because it will soften the finish on the wood and redistribute it.  If the droppings were embedded in the finish, I would need to use it to blend in the spots where the finish lifted.

I didn't have any Murphy's Oil Soap and I was afraid the oxygen peroxide created by mixing the OxiClean in hot water would cause discolorations.  So, looking through my own multitude of cleaning products for an oil base cleaner that would act like the wood oil soap, I turned up two, Ultra Krud Kutter and De-Solv-It.  I tested both but the organic De-Solv-It was more effective at softening the spots.  Even so, I still had to lift them with a flat blade screw driver and then smooth the area with fine steel wool.  They came off, but they took some of the finish with them.  Eventually, I will have to use Paul's Elixir to restore the finish but since the biggest spot is on the section that is usually sitting on the bottom when the emblem is upward, the box is now nice enough to display in my office near the Singer treadle cabinet.

*Note:  Paul Hayes (the Fenman) has an extensive article at Needlebar.org.  Chapter 4 of the article specifically demonstrates The Elixir while to rest of the article is worthwhile for understanding the pros and cons restoration. 

Finger Wiping Good!

With a head cold and tons of laundry to do, I tried to take it easy between loads.  This little towel sort of fell off my needles.  Later, with the laundry done, I sat in the sun to appreciate our recent appearance of summer sunshine and finish off the towel.   Now, that is what I call a productive but relaxing day!

I wanted something reversible that would work as a gift for the kitchen or bathroom with coordinating dishcloths or facecloths.  After a false start with another smaller towel freebie, this pattern developed.  It seems to have enough texture to be absorbent and is approximately the size of a guest towel (fingertip towel).

Download the free pattern:  Stepping Stones Fingertip Towel

From Dishcloth to Duster

I have some wonderfully soft cotton yarn from Hobby Lobby (I Love this Cotton).  It is just too nice for a dishcloth but a facecloth would be perfect.  Searching high and low through Ravelry and the cotton yarn sites for patterns just didn't turn up what I had in mind and the ridged dishcloth pattern I had made a few years ago, was just not to be found either in my files or on the internet.  So with a few frogged starts, a simple knit two rows, purl two rows ridge with a 3 stitch border became a facecloth with a delightful texture.  

With a good stash of firmer Peaches and Creme cotton on cones and an older simple Swifter sitting idle, in need of recyclable duster covers, I set out to use the same ridged pattern for my mop.  I cast on 70 stitches with a gauge of 4 stitches per inch and knit until there was enough to extend the width of the foam head.  Centering the mop head on the knit band, I folded over each end and stitched them to the bound edges to form pockets to fit the head snugly.  The duster head goes on great now but I am concerned it will shrink when laundered.  The next duster cover will be from the stash of acrylic yarn I didn't give away on FreeCycle before I moved.