Patchwork Pedaling

The Lorelei is up and running! I started a baby quilt to bond with my "new" machine. Learning to treadle and actually sew something is a little like learning to sew again. The quilt top has some imperfections that probably would not exist had I used my little Janome Jem Gold but considering, I think I did a pretty good job. ;)

I have to admit, I did use an old White Rotary 77 e-machine for about 25% of the work. I have my treadle on the main floor but my pressing station is downstairs. When I wearied of running up and downstairs, I set up the 77 for some of the piecing.

A Name for the White Rotary

The White Rotary has a name: Lorelei! She has already demonstrated her ability to call out and draw other treadles to her shore. I know the machine isn't made in Germany but I think she has a sturdy beauty like the rock she has been named after and she has a song she is singing to attract other machines like the fair maiden of the legends.

Yesterday, I remembered I had seen an ad for a treadle on craigslist in the city where I am headed to celebrate Christmas. I looked it up and there in living color was another White treadle in an oak cabinet. The price was $25! I emailed and asked the seller if I would be able to see the treadle the day after Christmas. He said, "Yes!" I can't believe it. The ad just expired tonight and I can't even link to it.

Lorelei's condition is much improved. I can now remove the needle and change presser feet. Also, the knob that adjusts the presser foot pressure is working. I have cleaned more green-brown lacquered oil off the machine. I think she will do more than sing. I found a nearly local source for reasonably priced treadle belts. Three are on their way. I should have them by the time I am back home from celebrating with family.

The New Member of the Fleet

Yesterday, I made another trip to see a treadle. This one was in a better place for viewing. We didn't have to stand in the rain to lift up a plastic cover. ;) A bit of history; I saw this treadle go up on craigslist on Tuesday. I asked for contact info and called the guy. I asked about some things that Katie Farmer recommended. She is the White guru on the Treadle On list. I was assured despite the missing oak plug next to the slide plate, that the cabinet was refinished and the machine would sew. The present owner had bought it from someone who was intending to sew on it.

When I saw the machine, the present owner said he had bought it as an intended gift for a relative but discovered she really wanted a Singer treadle. He found one and decided to sell the White. He said that the White had come up from CA with the previous owners. When he called, he got the husband and found out he knew nothing about the machine being for sale. Seems his wife had posted the ad without telling him. I guess he was a little irritated because he was working on the machine in hopes of sewing with it.

Now for some pictures. I have the machine on my workbench so you are just going to see the head. I will take more of the cabinet and irons later.

Okay, I know, this machine head is not going to win a beauty contest, but, hey, I can't afford anything in this area that might. Well, the truth is, I haven't been able to find much in the way of treadles in this part of the state. And besides, the handwheel and the working parts turn so easily. The handwheel just spins when I give it a good pull. I am really hopeful I can sew with this working wonder. The guy I bought it from wanted to sell it to someone that wanted it for its ability to sew. I think I was that someone. Now, I just have to get the tension right and do some more cleaning.

Back to the work bench. I haven't been able to get the presser foot off and there is a stubborn screw in the throat plate that is resisting me. Oh, I have to think of a name for this machine, too.

Scrap Catcher

This project makes a nice gift for a sewing friend. You can find the instructions for the project if you join the following Yahoo list: http://groups.yahoo.com/group/SGOTs_SewingBeeSite/files/

The project instructions are in: Thread Catcher Sewing Bee

Here are my notes on the changes I made:

Jane's Thread Catcher

Can use 2 fat quarters but a third accent color can be used for a band around top of bag.

One tab to attach scrap bag with a button: 3" by 6" sewn in seam of cover for tile (fold strip into quarters with right sides out, topstitch and make a pointed tab, may zigzag stitch part of tab together to form a smaller opening for the button.)

For heart pincushion, trace heart shape on one of two fabrics. Make a buttonhole in heart that will be on the bottom (interface for more stability). Cut open. Sew around heart shapes with a 1.5 stitch length. Trim seam allowance with pinking shears. Stuff firmly. Whip stitch buttonhole closed. Hot glue or Velcro on covered tile. I have been told the new heat fusible Velcro is very good.

I got 4 6-inch square tiles for 1.96 at Home Depot. I also tried the 4 inch tiles but made my bag smaller, too.

Here is a tip: If you can't slide the padded tile in the fabric cover easily, cut a piece of plastic wrap or shopping bag just big enough to go around the covered tile and then slide it in. Pull the plastic out after you have the tile in the cover.

Another from a friend: Use fusible vinyl to line inside of bag. Your threads and scraps will fall to the bottom more easily.

What Kind of Flower are You?

Okay, so I am not much into gardening but I took this quiz and I am a daffodil. The flower is me! So what are you?

I am a Daffodil What Flower Are You?

Operation: Machine Rescue

Meet Minnie: A 99K from Kilbowie, Scotland

Minnie joined the fleet from Kennewick, WA, on November 17. She was outside in an open trailer with a sheet of plastic for protection from the weather. It was pouring down rain and she was keeping company with a Free brand treadle in an oak #5 cabinet. If I had the space for both machines and was sure I could restore the Free, I would have taken both machines. The lady who listed them on craigslist did not have room to store them inside. But, my Subaru could only hold one cabinet and I knew this sweet 99K would easily clean up to make a nice hand-crank for sewing blocks for the 2008 TOGA in Seattle.

Below, you can see some of the dust and rust that had accumulated on Minnie. I still need to do a bit more cleaning but Minnie is sewing smoothly and handwheel operates easily. I just need to order a hand-crank and spoked wheel plus a spool pin from Cindy Peters.

Meet the 4-H Forum Fleet

Since we sponsored Ray White's sewing machine repair class, I have been busy collecting old zigzag machines in need of tender loving care for one of the 4-H Forum classes I will be teaching in Pasco, WA, in October. These machines were all in need of a thorough cleaning and lubing at the least, but some truly had repair issues. I picked up parts from e-bay stores and machines that came without other necessary part. Tips and encouragement came from the wonderful folks on the sewing machine repair lists at Yahoo.

The first machine I found came from one of our thrift stores. I was looking at it and the manager saw me. He said it had been in the store too long. He wanted it gone for $10. I figured it was a deal because the machine was an older Singer and looked to be functioning just fine. I only had to lube and clean up this fine simple zigzagger and he was ready to run. Meet King Leo, The Spartan (aka Singer 327K):

The next two machines came from two other thrift stores in town. I wanted to find older machines that had zigzag capabilities. This would make them more versatile for 4-H because they could be used for seam finishing and applique. I tried to stay away from the machines that I knew had non-metal gears but I couldn't resist this Singer because it ran so quietly and came with everything including the instruction manual, a rare find when buying old machines at yard sales and thrift stores. Meet Vinnie, a Singer Stylist 513.

Andy, a Singer 401A, was hiding out in a cabinet at the third thrift store. He had no cords or foot control plus the stitch selector was jammed and a thread guide was broken. The cabinet was optional so I offered 5 dollars for him and left the cabinet. I knew I had some work ahead of me but I figured parts and cords were somewhere on the internet. A fine lady, who also hosts Ray White's classes in Lake City, MN, had just what I needed to get this guy in shape to sew. I have yet to put on the thread guide but he has cords and a foot control and even a brown suitcase for travel.

Andy has a twin sister that I found at a yard sale. I paid more for Carrie but she had some decorative disks and a foot control that works fine despite a crack in the exterior. Cindy provided the cord for her, too.

Another lucky break came at a yard sale. I found a Singer 600, aka Eddy. Eddy needed some work on the bobbin winder, his one design flaw. Someone had not replaced the bracket properly that holds the bobbin in place as it fills in the machine. The bobbin would jump and the machine would jam if I forgot to wind the bobbin a very slow speed. I shamelessly gleaned a tip from the Singer man with a booth at our fair. Also, Terry's TnT site offered some vital information, too. Here is Eddy showing off his working parts:

Stay tuned! There are 5 more great machines ready to go to 4-H Forum.