The 5 dollar lesson machine, a Janome 443 straight stitch machine with drop feed, a cool bobbin winder, and a cord and plug to the light was a pesky little beast. I thought after I got the machine cleaned up and lubricated, it would treadle nicely. Well, it did, silently and smoothly. BUT, it would not pick up the bobbin thread easily and if it did, it made birds' nests with the needle thread as if there were no tension on it. The tension worked perfectly, though.
Well, I went over to Yahoo on the Vintage Japanese list and asked what was the problem. Bill Holman suspected a bent cushion spring. Well, he was right but I never succeeded in getting both screws loose to change the cushion spring. Even after Bill suggested swiveling the cushion spring to help turn the screw. But, after swiveling the cushion spring out twice, I made two attempts to reshape it. On the second try, it was a good fit and the machine is now back together and sewing beautifully!! Considering the time I have in on this machine, it has become very pricey. ;)
I will treadle it for awhile in the Singer cabinet with a borrowed bobbin case. I might even make a quilt top on it. Since the machine is short shank side clamper, it will use common feet and accessories, then I will bring it down to the Portland TOGA where it goes to Emily if she can supply the correct bobbin case and a Singer cabinet.
Now, a name for this pleasant stitching machine. Since the machine is a Japanese New Home, two tone green in color, and now a "green" environmentally friendly treadler, she is Midori (Japanese in origin and meaning green).
Hmm, Midori Ito was a figure skater. Maybe this machine will become a graceful free motion quilter. But probably not in my house. But just to show you I can free motion, I free handed my name on a test strip of fabric I used for testing the stitch quality. I must admit, Midori is a charmer and she will be hard to give up.
Well, I went over to Yahoo on the Vintage Japanese list and asked what was the problem. Bill Holman suspected a bent cushion spring. Well, he was right but I never succeeded in getting both screws loose to change the cushion spring. Even after Bill suggested swiveling the cushion spring to help turn the screw. But, after swiveling the cushion spring out twice, I made two attempts to reshape it. On the second try, it was a good fit and the machine is now back together and sewing beautifully!! Considering the time I have in on this machine, it has become very pricey. ;)
I will treadle it for awhile in the Singer cabinet with a borrowed bobbin case. I might even make a quilt top on it. Since the machine is short shank side clamper, it will use common feet and accessories, then I will bring it down to the Portland TOGA where it goes to Emily if she can supply the correct bobbin case and a Singer cabinet.
Now, a name for this pleasant stitching machine. Since the machine is a Japanese New Home, two tone green in color, and now a "green" environmentally friendly treadler, she is Midori (Japanese in origin and meaning green).
Hmm, Midori Ito was a figure skater. Maybe this machine will become a graceful free motion quilter. But probably not in my house. But just to show you I can free motion, I free handed my name on a test strip of fabric I used for testing the stitch quality. I must admit, Midori is a charmer and she will be hard to give up.
1 comment:
These older machines last forever as long as you perform regular preventive maintenance on them. I have an old White that my mother used when I was a baby, 49 yrs ago today, and it still sews. In fact, I should get it out of storage to stitch with it a bit.
Post a Comment